Standards and alloys

ALUMINUM ALLOYS

The production of extruded aluminum products is divided into: rods, pipes and sections, extruded profiles. The Extral press shop produces aluminum profiles in accordance with the guidelines of EN standards for the production of sections by extrusion and their processing.

In cases of non-standard implementations, individual mechanical parameters, tolerances and quality requirements can be agreed in detail with the client depending on the type of use of the products and the client's expectations.

> Production > Aluminium profiles production > Standards and alloys > Aluminium alloys

TYPES OF ALUMINUM ALLOYS

EN AW – 1050A (Al 99.5)
EN AW-1060 (Al 99.6)
EN AW-1070A (Al 99.7)
EN AW-6060(Al MgSi)
EN AW-6063(Al Mg0.7Si)
EN AW-6005A(Al SiMg(A))
EN AW-6082(Al Si1MgMn)
EN AW-6463 (Al Mg0.7Si(B))
EN AW-6061 (Al Mg1SiCu)

ALUMINUM ALLOYS CHEMICAL COMPOSITION

TYPES OF ALLOYS AND CHEMICAL COMPOSITION ACCORDING TO PN-EN: 573-3

Depending on the type of product, its application and customer requirements, the Extral press shopextrsion department is capable of producing extruded products from the following alloys with specific heat treatment, i.e. condition.

(note – changes in the table)

STANDARD PN-EN:573-3 Aluminium and aluminium alloys – Chemical composition and types of wrought products
Alloy designation	Si	Zn	Fe	Ti	Cu	Mn	Mg	Cr	Each	Total	Aluminium min
EN AW-1050A	0.25	0.07	0.40	0.05	0.05	0.05	0.05	–	0.03	–	99.50ᶜ
EN AW-1060	0.25	0.05	0.35	0.03	0.05	0.03	0.03	–	0.03	–	99.60ᶜ
EN AW-1070A	0.20	0.07	0.25	0.03	0.03	0.03	0.03	–	0.03	–	99.70ᶜ
EN AW-6060	0.30-0.6	0.15	0.10-0.30	0.10	0.10	0.10	0.35-0.6	0.05	0.05	0.15	residual
EN AW-6063	0.20-0.6	0.10	0.35	0.10	0.10	0.10	0.45-0.9	0.10	0.05	0.15	residual
EN AW-6005A	0.50-0.9	0.20	0.35	0.10	0.30	0.50	0.40-0.7	0.30	0.05	0.15	residual
EN AW-6082	0.7-1.3	0.20	0.50	0.10	0.10	0.40-1.0	0.6-1.2	0.25	0.05	0.15	residual
EN AW-6463	0.20-0.6	0.05	0.15	–	0.20	0.05	0.45-0.9	–	0.05	0.15	residual
EN AW-6061	0.40-0.8	0.25	0.7	0.15	0.15-0.40	0.15	0.8-1.2	0.04-0.35	0.05	0.15	residual